C 1500 Yukon XL 2WD V8-5.3L VIN T (2001)
5. Remove the steering damper mounting bolt (5) and the nut (6). Do not reuse the nut.
6. Remove the steering damper (4) from the vehicle.
7. Inspect the following parts:
-
The steering damper for leaks and damage
-
The mounting bolts and the nuts for damage or corrosion
Installation Procedure
1. Install the steering damper (4).
2. Install the mounting bolt (5) and new prevailing torque nut (6).
3. Install the steering damper ball stud (2) to the relay rod (3).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the J29193. Tighten the steering linkage installer in order to seat the ball stud in the relay rod.
