C 1500 Yukon XL 2WD V8-8.1L VIN G (2001)
1. Remove the screw retaining the recliner handle to the trim panel.
2. Remove the recliner handle.
Installation Procedure
1. Position the recliner handle on the side shield.
Notice: Refer to Fastener Notice.
2. Install the screw retaining the recliner handle to the trim panel.
Tighten the screws to 2 N.m (18 lb in).
Front Seat Back Frame Replacement
Front Seat Back Frame Replacement
Removal Procedure
1. Remove the seat from the vehicle.
2. Remove the head restraint and guides.
3. Remove the seat trim panel.
4. Disconnect the lumbar cable (6) underneath the seat cushion (disconnect the lumbar wire harness if equipped with power lumbar).
5. Remove the seat back trim cover and pad.
6. Remove the lumbar assembly (or power lumbar/bolster assembly if equipped.
7. Remove the seat belt retractor.
