C 2500 3/4 Ton Pickup 2WD L6-250 4.1L VIN D 2-bbl (1984)
1.
Write in the Vehicle Identification Number (VIN) of the car or cars in which you need the longer belt. The VIN is located on the left front top
surface of the instrument panel and is visible from the outside of the car. Note the VIN below.
2.
Part number, if shown, Manufacturer's Name and Model Number that appears on the label of the seat belt assembly along with the color of the
webbing. Colored extenders for past model vehicles are furnished on an "as material available basis" only. If webbing of the color designated for a
past model vehicle is not available, the extension will be furnished in black.
The label (Figure 2) which is stitched to the webbing is located either slightly above where the webbing attaches to the floor (near the door) or in
the retractor. The label on the webbing stowed inside the retractor can be found by fully extracting the webbing from the retractor. Note
information below:
