C 2500 3/4 Ton Pickup 2WD V8-379 6.2L DSL VIN J FI (1984)
Water Pump: Service and Repair
Fig. 21 Water pump installation
1.
Disconnect batteries.
2.
Remove fan and fan shroud and, drain radiator.
3.
Remove A/C hose bracket nuts (if equipped). Remove oil fill tube generator pivot bolt and generator belt.
4.
Remove generator lower bracket, power steering pump and belt, and A/C belt.
5.
Disconnect bypass hose and lower radiator hose. Remove water pump plate and water pump, Fig. 21.
6.
Reverse procedure to install. Before installing attaching bolts, apply anaerobic sealer 1052357 or equivalent to sealing surface as shown,
Fig. 21. Sealer should be wet to touch before installing bolts. Torque attaching bolts as shown.
