C 2500 Suburban 2WD V8-350 5.7L (1994)
Blower Motor: Service and Repair
With Air Conditioning
Front
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Instrument panel compartment.
3. Front screw from right door sill plate.
4. Right hinge pillar trim panel.
5. Electrical connectors at ECM, as necessary.
6. ECM and mounting bracket.
7. Electrical connectors from blower motor, as necessary.
8. Courtesy lamp (if equipped).
9. Bolt from right lower dash support.
10. Blower motor cover.
11. Blower motor cooling tube.
12. Blower motor flange screws.
13. Blower motor.
INSPECT
-
Blower motor terminals for distortion. Clean corrosion from terminals or replace motor as necessary.
-
Flange of the blower motor for damage or distortion that could cause a leak. Repair as necessary.
-
Blower fan for damage or distortion.
INSTALL OR CONNECT
1. Blower motor.
2. Blower motor flange screws.
3. Blower motor cooling tube.
4. Blower motor cover.
5. Bolt to right lower dash support.
6. Courtesy lamp (if equipped).
7. Electrical connectors to blower motor.
8. Mounting bracket and ECM.
9. Electrical connectors to ECM, as necessary.
10. Right hinge pillar trim panel.
11. Front screw into front door sill plate.
12. Instrument panel compartment.
13. Negative battery cable.
