C 2500 Suburban 2WD V8-350 5.7L (1994)
Knockout Removal
As originally installed, the upper control cannot be adjusted for caster and camber. However, if the caster or camber is measured and found to be out of
tolerance, the caster and camber can be set to the proper specifications.
Remove or Disconnect
Tools Required:
J 38794 Knockout Removal Tool
^
Raise and support the vehicle.
^
Support the lower control arms with jack or jack stands.
Important
^
The jack or stand must remain under the lower control arm during the removal and installation procedure in order to retain the lower control arm
position.
1. Tire and wheel assembly.
2. Nuts (50), cams (49), and bolts (48) from the upper control arm bracket (44).
3. Lift upper control arm (45) up and to the side to gain access to the inner portion of the frame bracket.
