C 2500 Suburban 2WD V8-350 5.7L (1994)
Removing Dimmer & Ignition Switch Assemblies
1. Negative (-) battery cable.
2. Washer head screw (44).
3. Hexagon nut (42).
4. Dimmer switch assembly (43) from rod (45).
5. Vehicle wire harness from dimmer switch (43).
INSTALL OR CONNECT
Removing Dimmer & Ignition Switch Assemblies
Adjusting Dimmer Switch
NOTICE: Ensure all fasteners are securely seated before applying required torque. Failure to do so may result in component damage or
malfunctioning of steering column.
1. Dimmer switch assembly (43) to rod (45).
2. Washer head screw (44) and hexagon nut (42).
^
Tighten finger tight.
