C 2500 Suburban 2WD V8-350 5.7L (1994)
NOTICE: Gently pull lower turn signal wires to remove any wire kinks that may be inside steering column assembly. Failure to do so may cause
damage to wire harness.
17. Wiring protectors (27) and (28).
18. Support bracket (83).
19. Hex head bolts (84).
TIGHTEN
^
Tighten bolts (84) to 30.0 Nm (22 lb.ft.).
20. Refer to "STEERING COLUMN COMPONENTS REPLACEMENT" to complete remaining steering column assembly.
21. Negative (-) battery cable.
Ignition Lock Cylinder & Upper Column Components - Floor Shift
UPPER COLUMN
INCLUDES:
SHAFT LOCK
TURN SIGNAL CANCELLING CAM ASM
UPPER BEARING SPRING
UPPER BEARING INNER RACE SEAT
INNER RACE
TURN SIGNAL SWITCH ASSEMBLY
BUZZER SWITCH ASSEMBLY
STRG COL LOCK CYLINDER SET
TOOLS REQUIRED:
^
J 23653-C Lock Plate Compressor
IMPORTANT
^
Before doing any service procedures in this section, removal of Steering Wheel is needed.
REMOVE OR DISCONNECT
