C 2500 Suburban 2WD V8-350 5.7L VIN K TBI (1995)
9. Right hinge pillar trim panel.
10. Front screw into front door sill plate.
11. Instrument panel compartment.
12. Negative battery cable.
-
Check circuit operation.
Auxiliary Unit (Rear)
Auxiliary Heater Module
Removing Blower Fan Cage
Remove or Disconnect
1. Negative battery cable.
2. Right rear quarter trim panel cover.
3. Electrical connectors.
4. Screws (29).
5. Cooling tube.
6. Blower motor (28).
7. Fan cage from the motor
Install or Connect
1. Fan cage to the motor.
2. Blower motor (28) to the heater case.
3. Screws (29). Tightens screws (29) to 1.7 Nm (15 lbs. in.).
4. Cooling tube.
5. Electrical connectors, as necessary.
6. Right rear quarter trim panel cover.
7. Negative battery cable.
-
Check circuit operation.
