C 2500 Suburban 2WD V8-350 5.7L VIN K TBI (1995)
Blower Motor Resistor: Service and Repair
With Air Conditioning
Main Unit (Front)
Blower Motor Relay Resistor
Remove or Disconnect
1. Negative battery cable.
2. Instrument panel compartment.
3. Electrical connectors, as necessary.
4. Screws.
5. Blower motor resistor.
Install or Connect
1. Blower motor resistor.
CAUTION:
Make sure the resistor coils do not contact each other. Improper operation or system damage may result.
2. Tighten screws to 1.9 Nm (17 lbs. in.).
3. Electrical connectors, as necessary.
4. Instrument panel compartment.
5. Negative battery cable.
-
Check circuit operation.
Rear Unit (Auxiliary)
