C 2500 Suburban 2WD V8-454 7.4L (1994)
Brake Lamp: Testing and Inspection
Preliminary Checks
1. Rear lamp systems (taillamps, clearance lamps, endgate lamps and license plate lamps) all receive voltage from same wire circuit BRN (9) and share
same ground terminal G410. If only one system is not working, LOCATE and REPAIR open in wiring and/or bulbs that pertain to that system.
2. Check condition of STOP, PARK LP, TURN-B/U Fuse(s). If fuse(s) is blown, locate and repair source of overload. Replace fuse(s).
