C 2500 Truck 2WD V8-5.7L VIN R (1997)
Tail Lamp: Service and Repair
Pickup, Suburban, and Utility Models
REMOVE OR DISCONNECT
-
Make sure the headlamp switch is off.
-
Lower the endgate.
1. Two screws retaining the taillamp assembly to the body.
2. Rotate taillamp assembly from the vehicle.
3. Electrical connector from the assembly.
4. Bulbs from the lamp base.
-
The top bulb is a parking lamp.
-
The center bulb is a parking, brake, and turn indicator lamp.
-
The lower bulb is a backup lamp.
-
Remove a bulb by pulling it straight out by the tabs on the base of the bulb.
INSTALL OR CONNECT
1. Bulbs to the lamp assembly.
-
Push each bulb straight in.
2. Lamp base to the lens assembly with two screws.
3. Electrical connector.
4. Taillamp assembly to the vehicle with two screws.