C 2500 Truck 2WD V8-5.7L VIN R (1997)
7. Adjust caster and camber to the correct specifications by rotating the bolt head installed through adjuster cam.
-
Tighten
a. Front upper control arm nuts (50) to 190 Nm (140 ft. lbs.).
b. Rear upper control arm nuts (50) to 190 Nm (140 ft. lbs.).
8. Set steering wheel on center, with wheels straight, and loosen adjuster sleeve nuts.
9. Adjust toe-in.
10. Tighten the tie rod adjuster sleeve nuts to 19 Nm (14 ft. lbs.).
11. Refer to steering linkage for proper position of clamps.
12. Recheck alignment specifications.
13. Lower the vehicle.
