C 2500 Truck 2WD V8-5.7L VIN R (1997)
Wheel Bearing: Service and Repair
Full-Floating Axle (10 1/2 Inch Ring Gear)
REAR WHEEL BEARINGS AND/OR HUB
^
Tools Required:
-
J 8092 Driver Handle
-
J 8608 Pinion Bearing Cup Installer
-
J 24426 Outer Wheel Bearing Cup Installer
-
J 24427 inner Wheel Bearing Cup Installer
-
J 24428-Axle Shaft Seal Installer
^
Raise the vehicle until the wheels are free to rotate.
REMOVE OR DISCONNECT
1. Axle shaft.
2. Hub and drum.
3. Oil Seal.
4. Inner bearing. Use a drift, to remove the bearing and cup.
5. Retaining ring.
-
Use snap ring pliers to remove the ring.