C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
6. Remove the camshaft reluctor.
7. Inspect the camshaft reluctor for damage.
8. Inspect the camshaft reluctor for being bent.
9. Replace the reluctor if damage is found.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the camshaft reluctor to the camshaft gear.
2. Install the camshaft reluctor bolts.
^
Tighten the camshaft reluctor bolts to 9 Nm (80 inch lbs.).
Important: Do not damage the teeth on the crankshaft reluctor assembly.
