C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
8. Remove the charged air cooler outlet duct from the vehicle.
9. Remove the bolts for the exhaust manifold heat shield.
10. Remove the exhaust manifold heat shield.
11. Remove the 2 nuts and 6 bolts with plain washer and bell view washer from the left exhaust manifold.
12. Remove the exhaust manifold.
12.1.
Remove the manifold from the rear stud.
12.2.
Remove the manifold from the front stud.
12.3.
Slide the manifold out the bottom, past the oil filter.
13. Remove the exhaust manifold gasket and discard.
Inspection and Repair
1. Clean the exhaust manifold.
2. Clean the exhaust manifold mating surfaces.
3. Inspect the exhaust manifold for cracks.
4. Inspect the exhaust manifold mating surfaces for damage.
5. Replace the exhaust manifold if any damage is found.
