C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
Fuel Cooler: Service and Repair
Pickup
REMOVAL PROCEDURE
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Relieve the fuel pressure.
3. Disconnect the fuel pipes from the fuel cooler (1).
4. Remove the retaining bolts (4, 6) from the chassis and crossover.
5. Remove the fuel cooler (1).
6. Remove the fuel cooler support bracket (3) from the fuel cooler (1).
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the fuel cooler support bracket (3) to the fuel cooler (1).
Tighten
^
Tighten the retaining bolt (5) to 18 N.m (13 lb ft).
^
Tighten the retaining bolt (5) to 18 N.m (13 lb ft).
2. Install the fuel cooler (1) to the chassis and crossover.
Tighten
Tighten the retaining bolts (4, 6 ) to 18 N.m (13 lb ft).
