C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
5. Use the following steps and the proper sequence to tighten the bolts:
5.1.
Tighten the flywheel bolts to 78 Nm (58 ft. lbs.).
5.2.
Tighten the flywheel bolts to 60 degrees using the J 36660-A.
5.3.
Tighten the flywheel bolts again to 60 degrees using the J 36660-A.
5.4.
Confirm the tightening torque is at least to 360 Nm (266 ft. lbs.).
6. Confirm the tightening torque is at least 274 Nm (202 ft. lbs.) with a torque wrench.
7. Install the transmission.