C 2500 Truck 2WD V8-8.1L VIN G (2002)
9. Remove the handle.
Installation Procedure
1. Install the handle to the vehicle.
2. If the lock cylinder is a replacement, apply a coating of GM P/N 12345120 or Canadian P/N 726548 or a similar lubricant to the inside of the lock
case and the cylinder keyway.
3. Install the door lock cylinder to the outside handle housing.
In order to code a new lock cylinder. Refer to Key and Lock Cylinder Coding (See: Steering and Suspension/Steering/Steering Column/Service
and Repair/Key & Lock Cylinder Coding) in General Information.
4. Install the lock cylinder clip to the lock cylinder rod.
