C 2500 Truck 2WD V8-8.1L VIN G (2002)
5. Install the handle rod to the handle assembly clip.
6. Remove masking tape from door handle.
Notice: Refer to Fastener Notice in Cautions and Notices.
7. Install the outside handle mounting nuts.
Tighten the nuts to 9 Nm (80 lb in).
8. Install the rubber cover.
9. Install the water deflector. Refer to Front Side Door Water Deflector Replacement. See: Front Door Panel/Service and Repair
10. Install the front side door trim panel. Refer to Front Side Door Trim Panel Replacement. See: Front Door Panel/Service and Repair
