C 2500 Truck 2WD V8-8.1L VIN G (2002)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the bolts to the hinge assembly, if removed.
Tighten the bolts to 35 Nm (26 lb ft).
3. Install the seat cushion trim cover (8) and the pad (7). Refer to Rear Seat Cushion Cover and Pad Replacement (See: Seat Cover/Service and
Repair/Removal and Replacement/Rear Seat Cushion Cover and Pad Replacement).
Seat Cushion Trim Cover and Pad Replacement
Seat Cushion Trim Cover and Pad Replacement
Removal Procedure
1. Remove the seat trim panel. Refer to Front Seat Trim Panel Replacement (See: Service and Repair/Front Seat Trim Panel Replacement).
2. Remove the outboard seat belt anchor nut. Pull the belt through the seat cushion.
3. Remove the front nuts (2) on the underside of the seat cushion.