C 2500 Truck 2WD V8-8.1L VIN G (2002)
Tailgate Release Handle: Service and Repair
Endgate Linkage Replacement
Endgate Linkage Replacement
Removal Procedure
1. Lower the endgate.
2. Loosen the endgate handle bolts. Refer to Endgate Handle Replacement (See: Endgate Handle Replacement).
3. Raise the endgate.
4. Remove the handle bezel by prying gently on the upper retainer tabs.
5. Lower and support the endgate.
6. Remove the endgate latch assembly. Refer to Endgate Latch Replacement (See: Tailgate Latch/Service and Repair/Removal and Replacement).
7. Disengage the linkage rod from the latch assembly.
