C 2500 Truck 2WD V8-8.1L VIN G (2002)
Parking Brake Lever: Service and Repair
Park Brake Release Handle Assembly Replacement
Removal Procedure
1. Remove the park brake release lever mounting bolt.
2. Remove the park brake release lever handle from the knee bolster.
3. Disconnect the park brake release cable from the lever.
Installation Procedure
1. Connect the park brake release cable to the lever.
2. Install the park brake release lever handle to the knee bolster.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the park brake release lever mounting bolt.
Tighten to 25 Nm (18 ft. lbs.).
