C 2500 Truck 2WD V8-8.1L VIN G (2002)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Oil Seal Replacement
-
Tools Required
-
J 43320 crankshaft Rear Seal Puller
-
J 42849 crankshaft Rear Seal Installer
Removal Procedure
1. Remove the flywheel.
2. Install the guide pins from J 43320 into the crankshaft.
3. Install the J 43320 over the guide pins.
4. Using a suitable drill, insert eight of the self-drilling sheet metal screws into the rear crankshaft seal, using a cries-cross pattern. The self-tapping
screws are included with the J 43320.