C 2500 Truck 2WD V8-8.1L VIN G (2002)
5. Install the generator bracket.
6. Install the generator bracket stud.
-
Tighten the generator bracket stud to 20 Nm (15 ft. lbs.).
7. Install the generator bracket bolts and nut.
-
Tighten the generator bracket bolts and nut to 50 Nm (37 ft. lbs.).
8. Install the power steering pump.
9. Install the generator.
10. Install the bypass hose.
11. Position the bypass hose clamps at the water crossover and water pump.
12. Install the heater inlet hose to the water crossover.
13. Position the heater inlet hose clamp at the water crossover.
14. Install the inlet hose to the water crossover.
15. Position the inlet hose clamp at the water crossover.
16. Install the drive belt tensioner.
