C 2500 Truck 2WD V8-8.1L VIN G (2002)
1. Position the EVAP engine purge pipe (1) to the engine.
2. Insert the purge pipe retaining clip into the fuel rail mounting bracket.
3. To connect the purge pipe connector (1), press the components together in order to snap the tab (2) in place.
^
Connect the EVAP purge pipe (1) to the chassis purge pipe.
^
Connect the EVAP purge pipe (1) to the EVAP canister purge valve (2).
4. Connect the generator harness connector (2).
