C 2500 Truck 2WD V8-8.1L VIN G (2002)
Evaporative Emissions Hose: Service and Repair
EVAP Hoses/Pipes Replacement - Canister/Fuel Tank
REMOVAL PROCEDURE
IMPORTANT: When replacing the EVAP pipe, always replace the pipe with original equipment or parts that meet the GM specifications for this
part. The replacement pipe must have the same type of fittings as the original pipe in order to ensure the integrity of the connection.
1. Remove the fuel tank.
2. Remove the rear EVAP pipe (1) from the fuel sender (2), the fuel tank roll over valve (3) and the fuel tank clips (6).
3. Cap the fuel sender EVAP pipe and the fuel tank roll over valve.
INSTALLATION PROCEDURE
