C 2500 Truck 2WD V8-8.1L VIN G (2002)
Fuel Injector: Service and Repair
REMOVAL PROCEDURE
NOTE: Use care in removing the fuel injectors in order to prevent damage to the fuel injector electrical connector pins or the fuel injector nozzles.
Do not immerse the fuel injector in any type of cleaner. The fuel injector is an electrical component and may be damaged by this cleaning method.
IMPORTANT: The engine oil may be contaminated with fuel if the fuel injectors are leaking.
1. Remove the fuel rail assembly.
2. Remove the injector retainer clip (4).
3. Remove the injector from the fuel rail pod.
4. Discard the injector retainer clip (1).
5. Remove the injector O-ring seals (2, 4) from both ends of the injector. Discard the O-ring seals.
INSTALLATION PROCEDURE
IMPORTANT: When ordering new fuel injectors, be sure to order the correct injector for the application being serviced.
