C 2500 Truck 2WD V8-8.1L VIN G (2002)
7. Tilt the top of the inflator module rearward to gain access to the SIR wiring.
8. Disconnect the SIR lead wire from the clip on the inflator module.
9. Disconnect the SIR lead wire from the clip on the steering wheel.
10. Disconnect the connector position assurance (CPA) retainer from the SIR connector.
11. Disconnect the SIR connector.
CAUTION: When carrying a live inflator module, make sure the bag opening is pointed away from you. This minimizes the chance of injury
in the case of an accidental deployment. Never carry the inflator module by the wires. Never carry the inflator module by the connector on
the underside of the module.
Make sure that the bag and trim cover are facing up whenever you place a live inflator module on any surface. This is necessary to provide a
free space for the bag to expand in the unlikely event of accidental deployment.
Never rest the steering column assembly on the steering wheel with the inflator module face down, and the column vertical. This may result
in personal injury.
12. Remove the inflator module.
13. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required
retention period. Refer to Inflator Module Handling and Scrapping.
INSTALLATION PROCEDURE
CAUTION: When carrying a live inflator module, make sure the bag opening is pointed away from you. This minimizes the chance of injury
in the case of an accidental deployment. Never carry the inflator module by the wires. Never carry the inflator module by the connector on
the underside of the module.
Make sure that the bag and trim cover are facing up whenever you place a live inflator module on any surface. This is necessary to provide a
free space for the bag to expand in the unlikely event of accidental deployment.
Never rest the steering column assembly on the steering wheel with the inflator module face down, and the column vertical. This may result
in personal injury.
