gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Frontal Air Bag Deployment - Component Replacement and Inspections|Page 11699 > < Frontal Air Bag Deployment - Component Replacement and Inspections|Page 11697

C 2500 Truck 2WD V8-8.1L VIN G (2002)

Page 3
background image

2. Install the inflatable restraint front end discriminating sensor mounting fasteners.

Tighten
Tighten fasteners to 10 N.m (89 lb in).

3. Connect the inflatable restraint front end discriminating sensor harness connector to the sensor.

4. Install the connector position assurance (CPA) to the inflatable restraint front end discriminating sensor harness connector.
5. Install the engine protection shield (if equipped).
6. Enable the SIR system.

Frontal Air Bag Deployment - Component Replacement and Inspections|Page 11699 > < Frontal Air Bag Deployment - Component Replacement and Inspections|Page 11697