C 2500 Truck 2WD V8-8.1L VIN G (2002)
3. If equipped, disconnect the accessory power fuse block front wiring harness electrical connector from the negative cable connector.
4. If equipped with a 4.8L, 5.3L, or 6.OL engine, remove the negative cable clip from the positive cable clip.
5. Remove the engine wiring harness ground/negative cable bolt.
6. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
7. If equipped with a 8.1L engine, remove the negative cable clip from the positive cable clip.
8. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
