gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Pitman Shaft Over-Center Preload Adjustment - Off Vehicle (700 Gear)|Page 10637 > < Pitman Shaft Over-Center Preload Adjustment - Off Vehicle (700 Gear)|Page 10635

C 2500 Truck 2WD V8-8.1L VIN G (2002)

Page 2
background image

6. Use a screwdriver to pry the backup washer (3) and the double lip seal (2) from the steering gear housing (1).
7. Inspect the steering gear housing (1) for burrs.

8. Insert J 6278 through the hole in the top of the steering gear housing (1).
9. Drive out the needle bearing (2).

Assembly Procedure 

1. Install the needle bearing (2) to the steering gear housing (1) using the J 6278.

Pitman Shaft Over-Center Preload Adjustment - Off Vehicle (700 Gear)|Page 10637 > < Pitman Shaft Over-Center Preload Adjustment - Off Vehicle (700 Gear)|Page 10635