C 2500 Truck 2WD V8-8.1L VIN G (2002)
5. Remove the retaining ring using the J 4245.
Important: Use care not to score the steering gear housing bore when prying out the seals and the washers.
6. Use a screwdriver to pry the backup washer (3) and the double lip seal (2) from the steering gear housing (1).
7. Inspect the steering gear housing (1) for burrs.
8. Insert J 6278 through the hole in the top of the steering gear housing (1).
9. Drive out the needle bearing (2).
Assembly Procedure
