C 2500 Truck 2WD V8-8.1L VIN G (2002)
Installation Procedure
1. Install the rack and pinion assembly (3) into the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the rack and pinion assembly mounting bolts (4), the washers (2) and the nuts (1).
^
Tighten the nuts to 185 Nm (136 ft. lbs.).
3. Install the intermediate shaft to the rack and pinion assembly.
4. Install the coupler clamp bolt to the intermediate shaft.
^
Tighten the bolt to 45 Nm (33 ft. lbs.).
