C 2500 Truck 2WD V8-8.1L VIN G (2002)
Front Steering Knuckle: Service and Repair
Rear Steering
Steering Knuckle Replacement
^
Tools Required
-
J 24319-B Universal Steering Linkage Puller
Removal Procedure
Notice: Refer to Rear Wheel Steering Notice in Service Precautions.
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the wheel hub and bearing.
4. Remove the upper ball joint.
5. Remove the lower ball joint.
6. Remove the outer tie rod retaining nut and bracket (2).
7. Disconnect the outer tie rod from the steering knuckle using the J 24319-B (1).
