C 2500 Truck 2WD V8-8.1L VIN G (2002)
1. Install the rear half transmission end of the range selector cable to the vehicle.
2. Install the cable to the clips on the transfer case, if equipped.
3. Align and install the cable to the bracket.
4. Install the retainer that secures the cable to the bracket.
5. Install a new E-clip to the front half (steering column end) of the cable.
6. Ensure that the transmission manual shaft lever is in the mechanical park position.
7. Install the range selector cable end (2) to the transmission range selector lever ball stud (1).