C 2500 Truck 2WD V8-8.1L VIN G (2002)
15. Ensure that the transmission manual shaft lever is in the mechanical park position.
16. Install the range selector cable end (2) to the transmission range selector lever ball stud (1).
17. The new front half (steering column end) of the cable will contain a new pre-installed E-clip.
18. Grasp the front half (cab end) of the transmission cable (1) in the left hand and the rear half (transmission end) of the transmission cable (2) in the
right hand.
19. Align the outside diameter of cable (2) with the inside of the diameter of cable (1).
