C 2500 Truck 2WD V8-8.1L VIN G (2002)
^
Connector (13) goes to solenoid (6).
^
Connector (12) goes to solenoid (4).
^
Connector (7) goes to solenoid (5).
^
Connector (10) goes to solenoid (2).
^
Connector (11) goes to solenoid (3).
^
Connector (9) goes to solenoid (1).
3. Push the main transmission connector (2) outward through hole (1) in the main housing until the retaining "feet" on the connector are near the
locked position.
4. Use J 44247 to seat the retaining "feet" on transmission connector (1).
5. Install the oil pan and suction filter.
6. Connect the external wiring harness to the main transmission connector.