C 2500 Yukon XL 2WD V8-6.0L VIN U (2001)
2. Using a flat-bladed tool, break the bond between the sealer and the door.
3. Pull off the water deflector from the inner door panel.
Installation Procedure
1. Install the water deflector to the inner door panel.
Use waterproof tape or 3M(R) 777 adhesive, as necessary.
2. Install the rear door trim panel.
Water Deflector Replacement - Rear Door
REMOVAL PROCEDURE
1. Remove the trim panel.
2. Using a flat-bladed tool, break the bond between the sealer and the door.
3. Pull the waterproof sealing tape from the deflector.
4. Remove the water deflector.
INSTALLATION PROCEDURE