C 2500 Yukon XL 2WD V8-6.0L VIN U (2001)
1. Install the jack to vehicle.
2. Turn the adjusting knob on jack assembly clockwise until tight.
3. Install the wing nut retaining the tool kit bracket.
4. Install the storage tray to left rear of vehicle.
Rear Quarter Trim Panel Replacement (Utility Left)
Rear Quarter Trim Panel Replacement (Utility Left)
Removal Procedure
1. Remove the rear seat.
2. Remove the Third-Pillar trim panel.
3. Remove the garnish molding.
4. Remove the door sill plate.
5. Remove the quarter panel trim screws.
6. Remove the quarter panel trim from the vehicle.
Installation Procedure
1. Install the quarter panel trim to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the quarter panel trim screws.
Tighten the quarter panel trim screws to 2 N.m (18 lb in).
3. Install garnish molding.
4. Install the door sill plate.
5. Install the Third-Pillar trim panel.
6. Install the rear seat.