Replacing Rear Folding Seat Back Cover on C 2500 Yukon XL 2WD V8-60L VIN U
3. Remove the seat cushion frame.
4. Remove the seat back frame.
5. Remove the outboard pivot bolt.
6. Remove the bolts holding the seat back folding mechanism.
7. Unsnap the recliner cable (1) from the folding mechanism (3).
8. Remove the front recliner attachment bolts (4).
9. Remove the recliner screw (5).
10. Remove the U-channel (1).
11. Remove the drive cable, if equipped with a power recliner.
12. Disconnect the recliner cable from the recliner mechanism.
13. Remove the recliner from the seat frame.
Installation Procedure
1. Attach the recliner cable to the recliner mechanism.
2. Install the drive cable, if equipped with a power recliner.