C 2500 Yukon XL 2WD V8-6.0L VIN U (2001)
Front Door Weatherstrip: Service and Repair
Front Side Door Weatherstrip Replacement (Door Opening)
Front Side Door Weatherstrip Replacement (Door Opening)
Removal Procedure
1. Open the door.
2. Remove the sill plate.
3. Remove the hinge pillar trim panel.
4. Remove the windshield pillar molding.
5. Remove the weatherstrip from the rear side door opening. Peel the unit away from channel, pulling the weatherstrip from the pinchweld flange.
Installation Procedure
1. Install the weatherstrip from the rear side door opening fully seating the weatherstrip into the channel.
2. Install the windshield pillar molding.
3. Install the hinge pillar trim panel.
4. Install the sill plate.
5. Check door closing effort and seal to door fit.