C 2500 Yukon XL 2WD V8-6.0L VIN U (2001)
![background image](/gmc/c_2500_yukon_xl_2wd/v8-6.0l_vin_u/Page-2356001.png)
Fuse Block: Service and Repair
Instrument Panel Electrical Center Replacement (Body Wiring Harness Junction Block)
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable(s).
2. Remove the harness from the front of the body wiring harness junction block.
3. Unsnap the cover from the body wiring harness junction block.
4. Unsnap the top pivots and rotate the body wiring harness junction block (1) down. Unsnap the lower pivots and remove the body wiring harness
junction block from the bracket (2).
5. Disconnect the two 68-way IP connectors.
6. Disconnect the remaining wiring connectors from the body wiring harness junction block.
7. Remove the body wiring harness junction block from the vehicle.
INSTALLATION PROCEDURE