C 2500 Yukon XL 2WD V8-6.0L VIN U (2001)
5. Remove the idler arm frame bolts (3) and the nuts (1).
6. Remove the idler arm (2) from the vehicle.
Installation Procedure
1. Position the idler arm (2) on the frame.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the frame bolts (3) and the nuts (1) to the idler arm.
-
Tighten the frame bolts to 99 Nm (73 ft. lbs.).
3. Install the relay rod (9) to the idler arm ball stud (1). Ensure the seal is on the stud.
