C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
Amplifier: Service and Repair
REMOVAL PROCEDURE
1. Lower the glove box.
2. Disconnect the electrical connectors.
3. Use the following steps in order to remove the amplifier from the bracket:
3.1.
Push the retention clip upward and in.
3.2.
Rotate the amplifier.
3.3.
Push the amplifier up in order to clear the amplifier mounting bracket and the HVAC module.
3.4.
Remove the amplifier.
INSTALLATION PROCEDURE
1. Connect the amplifier to the bracket by clipping the amplifier into place.
2. Connect the electrical connectors
3. Inspect the system operation.
