C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
Radiator Hose: Service and Repair
Radiator Hose Replacement - Inlet
Radiator Hose Replacement - Inlet (8.1. Engine)
Removal Procedure
1. Drain the cooling system. Refer to Draining and Filling Cooling System.
2. Reposition the inlet hose clamp from the radiator.
3. Remove the inlet hose from the radiator.
4. Reposition the inlet hose clamp from the water outlet.
5. Remove the inlet hose from the water outlet.
Installation Procedure
1. Install the inlet hose to the water outlet.
2. Reposition the inlet hose clamp to the water outlet.
