C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
Notice: Refer to Fastener Notice in Service Precautions.
28. Install the attaching bolt and washer. Use GM P/N 9428217 with GM P/N 15650963.
-
Tighten the lift bracket bolts to 40 Nm (30 ft. lbs.).
29. Remove the engine mount heat shield bolts and shields.
30. Remove the engine mount to engine mount bracket bolts.
31. Remove the engine using a suitable lifting devise.
32. Install the engine onto a suitable engine stand.
33. Remove the generator mounting bracket.
34. Remove the A/C compressor/power steering pump bracket from the cylinder head.
35. Remove the lift brackets from the cylinder head.