C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
21. Position the engine harness over the engine compartment.
22. Connect the following electrical connector:
-
Generator (1)
-
Injector harness (2)
-
Injector harness (2)
-
Ignition coil harness (3)
-
TP sensor (4)
-
ETC (5)
-
Purge valve solenoid (6)
23. Install the CPA retainer at the ignition coil harness.
24. Install the engine harness bolt and studs.
-
Tighten the engine harness bolt to 5 Nm (44 inch lbs.).
-
Tighten the engine harness studs to 10 Nm (89 inch lbs.).
25. Connect the following electrical connectors:
-
MAP sensor (1)
-
Ignition coil harness (2)
-
ECT sensor (3)