C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
9. Remove the water pump.
10. Remove and discard the water pump gaskets.
Installation Procedure
1. Place NEW water pump gaskets into place.
2. Install the water pump.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the water pump bolts.
-
Tighten the water pump bolts to 50 Nm (37 ft. lbs.).
4. Install the bypass hose.
5. Position the bypass hose clamps at the water pump and water crossover.
