C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
Installation Procedure
1. Attach J 36857 to the rear of the right cylinder head and to the front of the left cylinder head.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the attaching bolt and washer. Use GM P/N 9428217 with GM P/N 15650963.
-
Tighten the lift bracket bolts to 40 Nm (30 ft. lbs.).
3. Install the air compressor/power steering mounting bracket to the engine block.
-
Tighten the power steering pump bracket bolts and nut to 50 Nm (37 ft. lbs.).
4. Install the generator bracket.
5. Remove the engine using a suitable lifting devise.
6. Install the engine into the vehicle.
